Antennas & Transmission Line

Antenna Training System with 25 Antennas, PLL transmitter and receiver 0.040-4.3 GHz, 1 KHz step size, RF Power measurement in 0.1 dB resolution, 70 dB dynamic range, Coaxial Slotted line for Smith chart plotting and impedance R+jX measurement, Directional Coupler for VSWR/ Return Loss, Stepper motor antenna rotator, 1 degree resolution stepper motor, USB interface with polar/cartesian plotting software, Microstrip antennas, Antenna gain, return loss and pattern plot provided, 1000 location Frequency and level storage in receiver.

Minimum Configuration required for experiments. Order any antenna of your choice as per your syllabus from the ATS40 catalog above! Don't find what you are looking for - Email us and we will make it for you! Buy several base units with one full system of ATS40 for optimal usage and for more batches of students. PLL transmitter and receiver 0.040-4.3 GHz, 1 KHz step size, RF Power measurement in 0.1 dB resolution, 70 dB dynamic range, Stepper motor antenna rotator, 1 degree resolution stepper motor, USB interface with polar/cartesian plotting software,

Microwave Trainer with 21 Antennas like Dielectric Rod, Patch arrays, Horn etc, DRO stabilized antenna transmitter and receiver, Operating in the X band, In built Microwave power meter receiver with 0.1dB resolution, 70 dB dynamic range, Directional Coupler for VSWR/ Return Loss, Stepper motor antenna rotator, 1 degree resolution stepper motor, USB interface with polar/cartesian plotting software, Microstrip and Waveguide antennas, Antenna gain, return loss and pattern plot provided, 1000 location Frequency and level storage in receiver, Ability to transfer Digital signal over microwave.

RF and Microwave Antenna Trainer with 50 Antennas, 40MHz-12.4GHz PLL Synthesized Transmitter and Receiver,

0.04-4 GHz PLL Synthesized Network Analyser with high dynamic range of 60dB using a +10dBm of RF source and -70dBm sensitivity detector. Uses coaxial slotted line to measure unknown load impedance and plot on smith chart manually. Uses actual coaxial lines rather than simulated ones, Impedance matching, Measures VSWR, reflection coefficient, characteristic impedance, velocity of propagation, dielectric constant and signal attenuation in TDR, Measure parameters of 50, 75 and 300 Ohms cables, Study Time Domain Reflectometry, Study location and nature of discontinuities, Open/short, mismatched terminations, etc, Offers a complete view of the transmission line in analog and digital domains, which is essential for complete understanding of transmission line behavior

30-300 MHz RF sweep source with detector, Calibrated attenuator, Displays standing waves/maxima-minima on CRO, Uses actual coaxial lines rather than simulated ones, Impedance matching, Measures VSWR, reflection coefficient, characteristic impedance, velocity of propagation, dielectric constant and signal attenuation in TDR, Measure parameters of 50, 75 and 300 Ohms cables, Study Time Domain Reflectometry, Study location and nature of discontinuities, Open/short, mismatched terminations, etc, Offers a complete view of the transmission line in analog and digital domains, which is essential for complete understanding of transmission line behavior

5 Axis Antenna Far Field Positioner with 0-360 degree azimuth, +/- 90 degree elevation, 0-360 degree polarization, 150mm X-Y Linear Axis for phase centering, USB compatible software for positioning and antenna polar pattern plotting, Dual Ridge Horn Antenna, Frequency Range (0.8-18GHz), 18GHz SMA-SMA coaxial cables, Microwave anechoic absorbers for low RCS and quite zone disturbance

Dual Ridge Horn Antenna DRH20, Frequency Range (2-18GHz), Gain(Typ.) (8.5dBi) Polarization (Linear), VSWR (Typ.) (<2:1), 3dB Beam width (52-24 degree), Mounting Bracket (Aluminum right angled plates
with screws), etc.

Microwave Anechoic Chamber MAC20, EMI/EMC , Antenna & RCS Measurements, Low cost solution to anechoic chamber, Reflected signal (reaching test zone) down by min -30dB with respect to direct signal., Low RCS stand (FRP Rod and holding devices) to hold transmitting/ receiving antenna, Antenna under test / RCS measurement target stand on a
stepper motor monopod with resolution of 1deg. etc.

3GHz 60dBuV, noise generator for measurement of amplifier noise figure, gain flatness, jamming, etc.